Altitude valve factory right now: Water Distribution Systems: Altitude valves are commonly used in water distribution systems to control water levels in elevated tanks or reservoirs. They ensure that the tank does not overflow or run dry by automatically adjusting the flow of water into and out of the tank. Irrigation Systems: Altitude valves play a crucial role in maintaining optimal water levels in irrigation systems. They help regulate the flow of water from storage ponds, ensuring that crops receive adequate irrigation without wasting excessive amounts of water. Fire Protection Systems: In fire protection systems, altitude valves help maintain adequate water pressure in standpipes and fire hydrants. This ensures that firefighters have sufficient access to pressurized water during emergencies. Read more details on altitude control valve.

Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.

The valve is made of DI body and DI disc; Advanced newly design with dovetail seal design and captured by epoxy on the back, with multiple raised ring to have more contact with disc but less friction during closure; The double eccentric design provides less contact area of seal with disc, and less stress at the open position of the disc; The disc design with arch shape and thru disc can provide better flow capacity, stronger and less weight . The shaft and disc connection with tangential pin which can be exchangeable and provide rigid connection; The DN 100-500MM use flat disc, and DN 600-1200MM use arch shape disc; Epoxy coated interior and exterior; Valve design meets or exceeds EN 593; Top flange connection meets ISO 5211-1982, and F/F meets EN 558-1 series 13 & 14.

NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. Discover extra information on https://www.shsuotevalve.com/.

Are you curious about how altitude valves work and what they do? Well, you’ve come to the right place! In this blog post, we’ll take a deep dive into the world of altitude valves and explore their main components, how they work, different types available, common applications, setting them up effectively, and maintenance tips. So grab your seatbelt and get ready for an enlightening journey into the fascinating realm of altitude control valves! Whether you’re a homeowner or a professional in the plumbing industry, this article is packed with valuable insights that will satisfy your thirst for knowledge. Let’s begin our exploration now!

Flow control valves are used to regulate the flow volume of passing fluid in hydraulic systems. It prevents excessive flow by limiting flow to a preselected maximum rate, regardless of changing line pressure. It is a hydraulically operated, pilot controlled, diaphragm valve. The pilot control responds to the differential pressure produced across an orifice plate installed downstream of the valve. Accurate control is assured as very small changes in the controlling differential pressure produce immediate corrective action of the main valve. Flow rate adjustments are made by turning an adjusting screw on the pilot control. SHSUOTE is the top flow conrtrol valve manufacturer in China, hydraulic flow valves provide precision flow control in 1 direction, and automatically allow unrestricted free flow in opposite direction. The valve includes an orifice plate with a holder that should be installed one to five pipe diameters downstream of the Valve. As a flow control valve supplier, we provide several orifice plate with different hole optional for each size, see the additional table for selection of orifice to guarantee accurate control of flow rate. Contact us for more details!