Disc stack centrifuge factory 2024: The variable pump impeller technology can adjust the thickness of the liquid layer inside the machine while it is running, so that the Decanter centrifuge can be quickly adjusted without stopping to achieve separation effect. New independent drive system. The structural feature of the new independent drive system is that the drive of the rotary cylinder and the screw are respectively driven by two vertical variable frequency motors. A new type of gearbox is used to connect the drum and the screw. In addition to withstanding high torque, this gearbox can also independently rotate the screw without the drum rotating. Through the above discussion and analysis, it is not difficult to see that the influence of structural design on the processing capacity of decanter centrifuge is mainly reflected in the selection and design of mechanical parameters and corresponding auxiliary equipment. If each problem is considered comprehensively and concretely, it can also be considered comprehensively and concretely. The decanter centrifuge can better serve the solid-liquid separation field of various industries in our country. See additional information at https://www.lnszjx.com/video/products-detail-551110.

The materials then flow into the inner cavity of the bowl, which rotates in synchronization with the bowl. Because of their different specific gravities, the three types of centrifugal forces are as follows: the strongest for solids, the second strongest for heavy-phase liquids (like water), and the weakest for light-phase liquids (like oil). This allows the centrifugal force to work magic, forming an outer solid layer and two inner liquid layers. The solid material that has been deposited on the inside wall of the bowl is moved to the machine’s solid outlet using the screw, where it is dried further using extrusion and subsequently released. Meanwhile, the liquid material flows to the machine’s liquid phase outlet and overflows at various points, separating the solid, heavy, and light liquid phases. The Shenzhou Machinery 3-phase decanter centrifuge uses centripetal pump technology to determine the optimal placement of the liquid discharge layer based on the relative proportions of the heavy and light liquid phases and to adjust the position of the neutral layer of these phases. Additionally, the centripetal pump serves as the heavy liquid phase flow outlet, making it an ideal choice for pipeline layout.

The most important factor to keep in mind when manufacturing decanter centrifuge components or designing a completely new decanter assembly using a cone centrifuge parts casting machine is that the decanter bowl and tube wall thickness must be thin enough to meet design specifications while still providing each Structural integrity required for components. Stainless steel cylinders and conical bowls for decanter centrifuges are manufactured from the centrifugal casting process. Decanter Bowls, Bowl Cones, and Bowl Cylinders are typically made in various dimensions through centrifugal casting and additional machining. These can be purchased as a single part or already assembled/welded with a stainless-steel cylinder.

Deciding on a decanter centrifuge for laboratory use, particularly among 2-phase and 3-phase centrifuges, calls for a deep understanding of the lab’s desires. This relies on the knowledge to be processed, desired efficiency, area constraints, and budget. 2-phase decanter centrifuges are versatile because they separate solids from liquids without problems. But, 3-phase models, which separate immiscible beverages and solids, are exceptional for complex separations. This guide provided the necessary information regarding decanter centrifuges and their basic features, workings, and evidence comparison. Two immiscible liquids or a liquid and solid can be separated using the two-phase centrifuge. The separation happens automatically and in real-time, without human intervention. Environmental protection, sewage treatment, the chemical industry, food processing, fermentation, medicine, and mining metal and non-metal minerals are just a few of the many applications for two-phase centrifuges. Discover more information on https://www.lnszjx.com/.

Shenzhou Machinery is a subsidiary of Shenzhou Group.Which was established in 1980,conveying an area of 80000M2 ,there are 2500 staffs and employee in our company.200 of them are technicians and engineers.It has obtained the approvals and certifications of both CE and ISO. Some of our machines gained the new technology invent patent.We are on of the world’s leading manufacturers of decanter centrifuge,disc centrifuge,tubular centrifuge,separation systems and drying equipment.Now there are over 180 series or decanter centrifuges and disc separators used home and abroad.Including U.S.A , Canada ,Australia,Russia ,Brazil,Singapore and so on totally 70 countries.

Rotary drum diameter. The diameter of the Decanter centrifuge is 180-920mm, which means that the theoretical volume separation range is 1:130 when the diameter to length ratio is the same. The diameter of a Decanter centrifuge cannot increase indefinitely, because as the diameter increases, the allowable speed will decrease due to the decrease in material strength, resulting in a corresponding decrease in centrifugal force. From an economic perspective, it is not possible to increase the flow rate of a Decanter centrifuge by increasing its diameter. The ratio of drum diameter to length. In the past, the aspect ratio remained at 1:2, but now it can reach 1:3 or 1:4 (or even higher). The diameter to length ratio has an impact on the residence time of materials in the clarification zone, as it determines the volumetric flow rate of the centrifuge. The diameter to length ratio does not have a significant impact on the solid flow rate, but it has an impact on the moisture content of the mud cake.