Excellent coriolis meter supplier: Should I measure mass flow rate or volumetric flow rate? It really depends on the goal of your application. When determining whether to use mass flow and volumetric flow, it is important to determine if you want to measure/control a set volume or the number of molecules of process fluid. When to use mass flow meter? As mass flow instruments are capable of precisely measuring and controlling how gas molecules flow into and out of a process, they are useful in many applications. It is possible to consider mass flow rates as molar flow rates since the number of molecules flowing through the measurement point remains constant regardless of temperature or pressure. Discover even more information on coriolis mass flow meter.

Influence of humidity on measurement results when using vortex meter. The output of the vortex flowmeter is only proportional to the flow velocity of the fluid flowing through the measuring tube. When measuring wet saturated steam, the influence of water droplets on the output of the turbine flow meter is negligible, so it can be considered that the output of the turbine flow meter is entirely caused by the wet flow. Caused by the dry part of the steam. The density of the dry part, whether it is pressure compensation or temperature compensation, can be detected more accurately. The results of steam measurement are often used as the basis for economic settlement between the supply and demand sides. If the two parties agree to settle the fee according to the dry part of the steam and no charge for the condensed water, the impact of the phase change on the measurement is negligible and can be ignored.

Comprehensively consider the use requirements and procurement costs of gas turbine flowmeters. When the customized gas turbine flow meter did not appear in the domestic brand, the international brand can be said to be a super profitable product. A medium-sized gas turbine flow requires hundreds of thousands or even hundreds of thousands of yuan. And our domestic brands struggle tenaciously in a harsh environment where the strength and weakness are not an order of magnitude at all. It can be seen that when selecting a gas turbine flow meter, there are many factors to be considered, not only from before the purchase, but also after the purchase of the gas turbine flowmeter, all of which need to be considered. When choosing a gas turbine flowmeter, you must be careful!

Thermal mass flow meters are suitable for all industrial and test platform applications that require fast, accurate gas measurement. The insertion thermal mass flow meter directly indicates the mass flow or standardized volume flow of the gas without any additional pressure and temperature compensation. They have impressive high accuracy, short response times and a very wide flow range, with almost no loss of accuracy even at the lowest flow. See more info at https://www.bjssae.com/.

Sincerity, excellence in coriolis flow meter production with 33 years experience, Since 1987.Through continuous research, development and transformation, we have become the leader of the Coriolis Mass Flow Meters industries in China.Our products including coriolis mass flow meter,thermal mass flow meter,fork density meter and etc.We have 100+ workers and 5000+ factory,our customers from all over the world. We support OEM coriolis mass flow meter name plates.

It has been considered in the design that the steam becomes superheated, or it is difficult to determine which state it is in, or sometimes it is superheated and sometimes saturated, so the temperature and pressure compensation is adopted, and the above phase change has no effect on the measurement results. Considering saturated steam in the design, and adopting pressure compensation, the above-mentioned phase change will bring about a small error, that is, the compensation error caused by the density difference corresponding to the difference between the superheated steam temperature and the saturated steam temperature. The design is based on saturated steam, but temperature compensation is used, that is, the temperature of superheated steam is used as the saturation temperature to check the density table, which will generally cause large errors.

Sincerity first factory of 121 warehouse with one calibration line was officially established Since 2007. The 2nd generation coriolis mass flow meters were officially launched. The coriolis mass flow meters are upgraded with batch control functions. The size of the coriolis mass flow meters are largely reduced, and the display has been upgraded to LCD display (liquid crystal display) . Sincerity 4th generation coriolis mass flow meters were officially launched. They have been upgraded to integrated type coriolis flow meters, with sensor and transmitter. The coriolis flow meters added 0-10KHz, and 4-20mA output. We still need the magnetic bar to calibrate the zero point, and to modify the inner parameters.