Car ignition coil factory 2023: Ignition coils typically have a long life of operation — over 100,000 miles. However, they can malfunction eventually, causing that dreaded misfire. This issue will probably start out slowly while being hardly noticeable but will become more problematic over time. When a misfire occurs, even for a few seconds, your engine computer management will likely detect the issue and generate a trouble code. At which point the check engine light comes on. With a diagnostic scanner at a garage or auto parts store, you can then see which cylinder is misfiring and proceed from there. Another sign of a misfire can be a rough engine idle. In extreme cases, the vehicle may feel like it’s surging at a high RPM or like it may stall at low speeds. Find even more info at ignition coil manufacturers.

What is the reason? Here are some of them: The spark plug gap is too large, adjust the gap or replace the spark plug; The gasoline quality is not good, try changing to a higher-grade gasoline; The cylinder compression ratio is wrong, adjust the compression ratio; If there is a program failure on the computer board, you can go to the repair shop to test the car with a computer and clear the error message. If it doesn’t work, there may be a problem with your car’s transmission. Haiyan ignition coil manufacturer has many offices in other countries. One of the larger productive enterprises.

Using a collapsing magnetic field to induce an electric current: When a magnetic field has been created by applying an electric current to a coil of wire, any change in the electric current (increase or decrease in current flow) creates the same change in the magnetic field. If the electric current is switched off, the magnetic field will collapse. The collapsing magnetic field will then induce an electric current into the coil. If an electric current used to create a magnetic field is switched off, the magnetic field collapses, which induces another electric current into the coil.

When the electric current is initially switched on, the current flow rapidly increases to its maximum value. Simultaneously, the magnetic field or flux will progressively grow to its maximum strength, and will become stable when the electric current is stable. When the electric current is then switched off, the magnetic field will collapse back in towards the coil of wire. There are two main factors that affect the strength of the magnetic field: Increasing the current being applied to the coil of wire strengthens the magnetic field; The higher number of windings in the coil, the stronger the magnetic field.

The hardware accessories series is available in a wide range of types and specifications. Haiyan hardware accessories manufacturer carries out strict quality monitoring and cost control on each production link of hardware accessories, from raw material purchase, production and processing and finished product delivery to packaging and transportation. This effectively ensures the production of hardware accessories manufacturer has better quality and more favourable prices than other products in the industry. Find more details at https://www.hj-auto.com/.

Haiyan car ignition coil manufacturers have professional production workshops and great production technology, our main product is the car ignition coil, automotive ignition coil and engine coil. The Haiyan car ignition coil with the national quality inspection standards, has reasonable structure, stable performance, good safety, and high reliability. Our automotive ignition coil is also available in a wide range of types and specifications. Haiyan ignition coil supplier will try our best to meet Customers’ needs.

How does an ignition coil work? The main task of the ignition coil is to transform the on-board voltage of 12V available in the vehicle to the required ignition voltage and then passed on to the spark plug. Basically, the function of the ignition coil is relatively simple to explain. The ignition coil itself contains a primary and a secondary winding. The primary winding has very few turns, while the secondary winding has very many. As soon as the engine control unit sends a signal to the ignition coil, the on-board voltage of 12V flows through the primary winding. Through this process, a magnetic field is built up. As soon as the signal from the engine control unit is interrupted again, this magnetic field is abruptly reduced. This abrupt degradation generates a high voltage in the secondary winding. This high voltage is now transmitted to the spark plug, which consequently generates a spark.